SeriesPV400 (Flange Ends)
2/2-vejs skråsædeventil til medium op til + 180 ° C, Tilslutning, DN 15-100 med Flange Ends
? Høj flowhastighed
? Lang levetid
? NC og NO universelle aktuatorer med modulært
universel tilbehørsprogram op til at styre hoveder
? Kan leveres med strømningsretningen under eller over sædet
? Enkel konvertering af kontrolfunktionen
Aktuator Størrelse
Port Størrelse | Standard aktuator størrelse mm | Flange specifikation: DIN2576 (JB / T82.1) ISO / JIS er også tilgængelig |
||
PA | SS | AL | ||
DN15 | 40,50 | 40,50 | 40,50 | |
DN20 | 50,63,80 | 50,63,90 | 50,63,80 | |
DN25 | 50,63,80 | 50,63,90 | 50,63,80 | |
DN32 | 63,80 | 63,90 | 63,80 | |
DN40 | 63,80 | 63,90 | 63,80 | |
DN50 | 63,80 | 63,90 | 63,80 | |
DN65 | 80.100 | 90.125 | 80.100 | |
DN80 | 100 | 125 | 100 | |
DN100 | 125 | 125 | 125 |
Specifikation
Model Specifikation |
nomal Lukket | P015NC | P020NC | P025NC | P032NC | P040NC | P050NC | P065NC | P080NC | P100NC |
nomal Open | P015NO | P020NO | P025NO | P032NO | P040NO | P050NO | P065NO | P080NO | P100NO | |
nomal Lukket | S015NC | S020NC | S025NC | S032NC | S040NC | S050NC | S065NC | S080NC | S100NC | |
nomal Open | S015NO | S020NO | S025NO | S032NO | S040NO | S050NO | S065NO | S080NO | S100NO | |
Materiale boday / aktuator | S.S304 316 / PA | |||||||||
Sædetætning | PTFE / FPM | |||||||||
ventilstammeforsegling | PTFE / FPM | |||||||||
stempelpakningen | PTFE / FPM / NBR | |||||||||
Tempreture af Medium | PTFE | -10 ~ 200 ℃ | ||||||||
FPM | -10 ~ 150 ℃ | |||||||||
Installation | Downsteam / Upsteam | |||||||||
Operating Metode | stempel Pilot | |||||||||
Omgivende og væske | Luft, vand, Oil.Steam (50CTS Bellow) | |||||||||
Port størrelse | G1 / 2 | G3 / 4 | G1 | G1 G1 / 4 | G1 G1 / 2 | G2 | G2 1/2 | G3 | G4 | |
Nominel diameter mm | 13 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | |
Kv (m3 / h) | 4.2 | 8 | 19 | 27,5 | 42 | 55 | 90 | 115 | 200 | |
Trykområde Mpa | 0 ~ 1,6 | 0 ~ 1,6 | 0 ~ 1,6 | 0 ~ 1,6 | 0 ~ 1,6 | 0 ~ 1,6 | 0 ~ 1,6 | 0 ~ 1,6 | 0 ~ 1,6 | |
Min.Control MPa | 0,3 | 0,35 | 0,35 | 0,35 | 0,35 | 0,35 | 0,35 | 0,40 | 0,40 | |
Executor Dimensin mm | 40/50 | 50 | 50/63 | 63 | 63 | 63/90 | 90 | 125 | 125 |