-
There are three structures of the pneumatic cylinder: 1.Cylinder: The inner diameter represents the output force of the cylinder. The piston should slide smoothly back and forth in the cylinder, and the surface roughness of the inner surface of the cylinder should reach Ra0.8μm. 2. End cover: The...Per saperne di più »
-
After more than 30 years of hard work, China’s hardware industry has become a veritable hardware power. However, China’s hardware companies are still facing the transformation from a hardware power to a hardware power, and need to expand the wings of brand and industrial regionalizati...Per saperne di più »
-
The application and development of industrial automation technology is the main means and direction of technological development for industrial technological transformation and technological progress. The technical level of industrial automation not only affects the development of the entire indu...Per saperne di più »
-
The chemical name of PU is plastic elastomer, which is divided into two types: polyester type and polyether type (the latter is more expensive and more resistant to hydrolysis). The PU tube we are talking about actually refers to TPU tube, abbreviated as: PU, which is food-grade non-toxic and odo...Per saperne di più »
-
1. Cylinder: The inner diameter represents the output force of the cylinder. The piston should slide smoothly back and forth in the cylinder, and the surface roughness of the inner surface of the cylinder should reach Ra0.8μm. 2. End cover: The end cover is equipped with intake and exhaust ports,...Per saperne di più »
-
KUCHING, Aug 15 — The Domestic Trade and Consumer Affairs Ministry today warned MyGaz Sdn Bhd, which manages the bottling and distribution of liquefied petroleum gas (LPG) in the state, to take steps to overcome the shortage of gas cylinders. “I urge the company to give its full co-operation so t...Per saperne di più »
-
2017,Oct.31st—Nov.3rd, joint exhibition PTC ASIA 2017 in Shanghai Per saperne di più »
-
2017, aprile 24-28, mostra collettiva di Hannover Mess 2017 di Hannover, Germania Per saperne di più »
-
2016,17th-20 marzo, mostra collettiva WIN EURASIA AUTOMATION 2016 a Istanbul Per saperne di più »
-
2016,1st-4 novembre, mostra collettiva PTC ASIA 2016 di Shanghai Per saperne di più »
-
2016,16th, settembre, PRIUS mossa pneumatica nel nuovo stabilimento. Per saperne di più »
-
2015,11th-14 novembre, unire mostra CSF Johannesburg 2015 a Johannesburg, in Sud Africa Per saperne di più »
-
2015,27th-30 Ottobre, mostra collettiva PTC ASIA 2015 di Shanghai Per saperne di più »