SeriesPV400 (Flange desinit)
II / II-Angulus istiusmodi modus CYMBALON ibi sisti cogentur per medium usque ad CLXXX + F, Connection, 15-100 ut DN ad fines Flange
? Fluxus excelsum rate
? Longa vita cycle
? NC, & NO ad modularis universae actuators
universae accessorie ad control progressio capitibus
? Et infra, sive supra sedem Deliverable fluxus directionem
? Simplex munus conversionem ad imperium
Location actus
Location Portus | Latin Actuator mm Location | LABIUM speciem: DIN2576 (JB / T82.1) ISO / IEC est etiam available JIS |
||
PA | P. | AL, | ||
DN15 | 40,50 | 40,50 | 40,50 | |
DN20 | 50,63,80 | 50,63,90 | 50,63,80 | |
DN25 | 50,63,80 | 50,63,90 | 50,63,80 | |
DN32 | 63,80 | 63,90 | 63,80 | |
DN40 | 63,80 | 63,90 | 63,80 | |
DN50 | 63,80 | 63,90 | 63,80 | |
DN65 | 80.100 | 90.125 | 80.100 | |
DN80 | 100 | 125 | 100 | |
DN100 | 125 | 125 | 125 |
specification
model Specification |
Propinquus normali sitam | P015NC | P020NC | P025NC | P032NC | P040NC | P050NC | P065NC | P080NC | P100NC |
Patefacio normali sitam | P015NO | P020NO | P025NO | P032NO | P040NO | P050NO | P065NO | P080NO | P100NO | |
Propinquus normali sitam | S015NC | S020NC | S025NC | S032NC | S040NC | S050NC | S065NC | S080NC | S100NC | |
Patefacio normali sitam | S015NO | S020NO | S025NO | S032NO | S040NO | S050NO | S065NO | S080NO | S100NO | |
Boday materia de / Actuator | S.S304 CCCXVI / PA | |||||||||
sigillum sedes | PTFE / FPM | |||||||||
Folia sigillum | PTFE / FPM | |||||||||
Piston sigillum | PTFE / FPM / NBR | |||||||||
Of Medium Tempreture | PTFE | CC ℃ -10 ~ | ||||||||
FPM | CL ~ -10 ℃ | |||||||||
installing | Downsteam / Upsteam | |||||||||
Operating Ratio | plunger nauclerus | |||||||||
Ambientium, et fluida | Aeris, Aquæ, Oil.Steam (50CTS Bellow) | |||||||||
Portus magnitudine | C1 / II | G3 / IV | G1 | G1 C1 / IV | G1 C1 / II | G2 | G2 1/2 | G3 | G4 | |
Mm diametro Nominal | 13 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | |
Kv (m3 / h) | 4,2 | 8 | 19 | 27,5 | 42 | 55 | 90 | 115 | 200 | |
Mpa dolor pressura | 1.6 0 ~ | 1.6 0 ~ | 1.6 0 ~ | 1.6 0 ~ | 1.6 0 ~ | 1.6 0 ~ | 1.6 0 ~ | 1.6 0 ~ | 1.6 0 ~ | |
Min.Control Mpa Pressure | 0,3 | 0,35 | 0,35 | 0,35 | 0,35 | 0,35 | 0,35 | 0,40 | 0,40 | |
Executor mm Dimensin | 40/50 | 50 | 50/63 | 63 | 63 | 63/90 | 90 | 125 | 125 |