Runtuyan PV300 (Weld tungtung)
2/2 arah Angle-Seat klep formedium nepi ka + 180 ° C, kalawan sambungan Weld Ahir, DN 15-65
●aliran High laju
●hirup Long siklus
●Pikeun sambungan hygienic kalawan awak tungtung weld
●NC jeung NO actuators universal jeung modular program aksésori universal nepi ka ngadalikeun huluna
●Deliverable kalawan aliran arah handap atanapi luhur korsi
●konversi Basajan sahiji fungsi kontrol
Ukuran Actuator
port Ukuran | Baku Actuator Ukuran mm | PV300 Series Plunger Pilot klep sudut korsi ieu propelled ku actuator piston, boh lakonan tunggal atawa lakonan ganda. Actuators dijieun tina tilu bahan béda, lumaku ka suhu kerja béda: 2/2 Jalan stainless steel klep kalawan aliran badag kapasitas tipe V anjing laut mastikeun dipercaya jeung éféktif sealing Maintenence bébas, cocog sareng rupa asesoris, arah nunjukkeun, stroke ngawatesan atawa manual switching tiasa dihontal sacara merenah. |
||
Pa | SS | AL | ||
DN15 | 40,50 | 40,50 | 40,50 | |
DN20 | 50,63,80 | 50,63,90 | 50,63,80 | |
DN25 | 50,63,80 | 50,63,90 | 50,63,80 | |
DN32 | 63,80 | 63,90 | 63,80 | |
DN40 | 63,80 | 63,90 | 63,80 | |
DN50 | 63,80 | 63,90 | 63,80 | |
DN65 | 80.100 | 90.125 | 80.100 |
spésifikasi
model spésifikasi |
Nomal Ditutup | P015NC | P020NC | P025NC | P032NC | P040NC | P050NC | P065NC |
Nomal Buka | P015NO | P020NO | P025NO | P032NO | P040NO | P050NO | P065NO | |
Bahan tina boday / Actuator | S.S304 316 / Pa | |||||||
Métode operasi | Plunger Pilot | |||||||
Ambient sarta cairan | Hawa, Cai, Oil.Steam (50CTS Bellow) | |||||||
ukuran port | G1 / 2 | G3 / 4 | G1 | G1 G1 / 4 | G1 G1 / 2 | G2 | G2 1/2 | |
Nominal diaméterna mm | 13 | 18 | 24 | 31 | 35 | 45 | 61 | |
Kv (m3 / h) | 4.2 | 9 | 19 | 33 | 42 | 59 | 90 | |
model spésifikasi |
Nomal Ditutup | S015NC | S020NC | S025NC | S032NC | S040NC | S050NC | S065NC |
Nomal Buka | S015NO | S020NO | S025NO | S032NO | S040NO | S050NO | S065NO | |
Bahan tina boday / Actuator | S.S304 316 / Pa | |||||||
segel korsi | PTFE / FPM | |||||||
segel bobot | PTFE / FPM | |||||||
segel piston | PTFE / FPM / NBR | |||||||
Tempreture of Medium | PTFE | -10 ~ 200 ℃ | ||||||
FPM | -10 ~ 150 ℃ | |||||||
Masang | Downsteam / Upsteam |