SeriesPV400 (Flange Natapos)
2/2-way Angle-Upuan balbula para sa medium hanggang sa + 180 ° C, Koneksyon, DN 15-100 na may Flange Natapos
? Mataas na daloy ng rate
? Long buhay cycle
? NC at WALANG unibersal actuators sa modular
unibersal accessory program hanggang sa makontrol ang mga ulo
? Deliverable sa daloy direksyon sa ibaba o sa itaas ng upuan
? Simple conversion ng ang control function na
actuator Sukat
port Size | Standard Actuator Sukat mm | Flange pagtutukoy: DIN2576 (JB / T82.1) ISO / JIS ay magagamit din |
||
PA | SS | AL | ||
DN15 | 40,50 | 40,50 | 40,50 | |
DN20 | 50,63,80 | 50,63,90 | 50,63,80 | |
DN25 | 50,63,80 | 50,63,90 | 50,63,80 | |
DN32 | 63,80 | 63,90 | 63,80 | |
DN40 | 63,80 | 63,90 | 63,80 | |
DN50 | 63,80 | 63,90 | 63,80 | |
DN65 | 80,100 | 90,125 | 80,100 | |
DN80 | 100 | 125 | 100 | |
DN100 | 125 | 125 | 125 |
espesipikasyon
Modelo Specification |
nomal Isinara | P015NC | P020NC | P025NC | P032NC | P040NC | P050NC | P065NC | P080NC | P100NC |
nomal Open | P015NO | P020NO | P025NO | P032NO | P040NO | P050NO | P065NO | P080NO | P100NO | |
nomal Isinara | S015NC | S020NC | S025NC | S032NC | S040NC | S050NC | S065NC | S080NC | S100NC | |
nomal Open | S015NO | S020NO | S025NO | S032NO | S040NO | S050NO | S065NO | S080NO | S100NO | |
Material ng boday / Actuator | S.S304 316 / PA | |||||||||
upuan seal | PTFE / FPM | |||||||||
stem seal | PTFE / FPM | |||||||||
piston seal | PTFE / FPM / NBR | |||||||||
Tempreture ng Medium | PTFE | -10 ~ 200 ℃ | ||||||||
FPM | -10 ~ 150 ℃ | |||||||||
Pag-install ng | Downsteam / Upsteam | |||||||||
Pamamaraan operating | Plunger Pilot | |||||||||
Ambient at tuluy-tuloy | Air, Water, Oil.Steam (50CTS Bellow) | |||||||||
port sukat | G1 / 2 | G3 / 4 | G1 | G1 G1 / 4 | G1 G1 / 2 | G2 | G2 1/2 | G3 | G4 | |
Nominal Diameter mm | 13 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | |
Kv (m3 / h) | 4.2 | 8 | 19 | 27.5 | 42 | 55 | 90 | 115 | 200 | |
Pressure Saklaw Mpa | 0 ~ 1.6 | 0 ~ 1.6 | 0 ~ 1.6 | 0 ~ 1.6 | 0 ~ 1.6 | 0 ~ 1.6 | 0 ~ 1.6 | 0 ~ 1.6 | 0 ~ 1.6 | |
Min.Control presyon Mpa | 0.3 | 0.35 | 0.35 | 0.35 | 0.35 | 0.35 | 0.35 | 0.40 | 0.40 | |
Ang tagapagpatupad Dimensin mm | 40/50 | 50 | 50/63 | 63 | 63 | 63/90 | 90 | 125 | 125 |