-
There are three structures of the pneumatic cylinder: 1.Cylinder: The inner diameter represents the output force of the cylinder. The piston should slide smoothly back and forth in the cylinder, and the surface roughness of the inner surface of the cylinder should reach Ra0.8μm. 2. End cover: The...Leugh tuilleadh »
-
After more than 30 years of hard work, China’s hardware industry has become a veritable hardware power. However, China’s hardware companies are still facing the transformation from a hardware power to a hardware power, and need to expand the wings of brand and industrial regionalizati...Leugh tuilleadh »
-
The application and development of industrial automation technology is the main means and direction of technological development for industrial technological transformation and technological progress. The technical level of industrial automation not only affects the development of the entire indu...Leugh tuilleadh »
-
The chemical name of PU is plastic elastomer, which is divided into two types: polyester type and polyether type (the latter is more expensive and more resistant to hydrolysis). The PU tube we are talking about actually refers to TPU tube, abbreviated as: PU, which is food-grade non-toxic and odo...Leugh tuilleadh »
-
1. Cylinder: The inner diameter represents the output force of the cylinder. The piston should slide smoothly back and forth in the cylinder, and the surface roughness of the inner surface of the cylinder should reach Ra0.8μm. 2. End cover: The end cover is equipped with intake and exhaust ports,...Leugh tuilleadh »
-
KUCHING, Aug 15 — The Domestic Trade and Consumer Affairs Ministry today warned MyGaz Sdn Bhd, which manages the bottling and distribution of liquefied petroleum gas (LPG) in the state, to take steps to overcome the shortage of gas cylinders. “I urge the company to give its full co-operation so t...Leugh tuilleadh »
-
2017,Oct.31st—Nov.3rd, joint exhibition PTC ASIA 2017 in Shanghai Leugh tuilleadh »
-
2017, 24mh-28mh Apr., co taisbeanadh Hannover Mess Hannover ann an 2017, a 'Ghearmailt Leugh tuilleadh »
-
2016,17th-20mh Mhàrr, co taisbeanadh a bhuannachadh EURASIA fèin-ghluasad ann an 2016 Istanbul Leugh tuilleadh »
-
2016,1st-4mh Nov., co taisbeanadh PTC Asia 2016 ann an Shanghai Leugh tuilleadh »
-
2016,16th, Sultain, PRIUS Pneumatic gluasad gu factaraidh ùr. Leugh tuilleadh »
-
2015,11th-14mh, Samhainn., Còmhla taisbeanadh CSF Johannesburg 2015 ann an Johannesburg, Afraga a Deas Leugh tuilleadh »
-
2015,27th-30mh Oct., co taisbeanadh PTC Asia 2015 ann an Shanghai Leugh tuilleadh »