-
There are three structures of the pneumatic cylinder: 1.Cylinder: The inner diameter represents the output force of the cylinder. The piston should slide smoothly back and forth in the cylinder, and the surface roughness of the inner surface of the cylinder should reach Ra0.8μm. 2. End cover: The...ອ່ານເພີ່ມເຕີມ »
-
After more than 30 years of hard work, China’s hardware industry has become a veritable hardware power. However, China’s hardware companies are still facing the transformation from a hardware power to a hardware power, and need to expand the wings of brand and industrial regionalizati...ອ່ານເພີ່ມເຕີມ »
-
The application and development of industrial automation technology is the main means and direction of technological development for industrial technological transformation and technological progress. The technical level of industrial automation not only affects the development of the entire indu...ອ່ານເພີ່ມເຕີມ »
-
The chemical name of PU is plastic elastomer, which is divided into two types: polyester type and polyether type (the latter is more expensive and more resistant to hydrolysis). The PU tube we are talking about actually refers to TPU tube, abbreviated as: PU, which is food-grade non-toxic and odo...ອ່ານເພີ່ມເຕີມ »
-
1. Cylinder: The inner diameter represents the output force of the cylinder. The piston should slide smoothly back and forth in the cylinder, and the surface roughness of the inner surface of the cylinder should reach Ra0.8μm. 2. End cover: The end cover is equipped with intake and exhaust ports,...ອ່ານເພີ່ມເຕີມ »
-
KUCHING, Aug 15 — The Domestic Trade and Consumer Affairs Ministry today warned MyGaz Sdn Bhd, which manages the bottling and distribution of liquefied petroleum gas (LPG) in the state, to take steps to overcome the shortage of gas cylinders. “I urge the company to give its full co-operation so t...ອ່ານເພີ່ມເຕີມ »
-
2017,Oct.31st—Nov.3rd, joint exhibition PTC ASIA 2017 in Shanghai ອ່ານເພີ່ມເຕີມ »
-
ປີ 2017, ວັນທີ 24, 28 ເມສາງານວາງສະແດງຮ່ວມມືລະຫວ່າງ Hannover ລັງກິນອາຫານ 2017 ໃນ Hannover, ເຢຍລະມັນ ອ່ານເພີ່ມເຕີມ »
-
2016,17th ທີ 20 ມີນາງານວາງສະແດງຮ່ວມມືລະຫວ່າງ WIN Eurasia AUTOMATION 2016 ໃນ Istanbul ອ່ານເພີ່ມເຕີມ »
-
2016,1st-4 ພະຈິກວາງສະແດງຮ່ວມມືລະຫວ່າງ PTC ASIA 2016 ໃນຊຽງໄຮ ອ່ານເພີ່ມເຕີມ »
-
2016,16th, Sep. , PRIUS ເຄື່ອນໄຫວບໍກັບໂຮງງານຜະລິດໃຫມ່. ອ່ານເພີ່ມເຕີມ »
-
2015,11th ທີ 14, NOV., ເຂົ້າຮ່ວມງານວາງສະແດງ CSF Johannesburg 2015 ໃນ Johannesburg, ອາຟຣິກາໃຕ້ ອ່ານເພີ່ມເຕີມ »
-
2015,27th, ວັນທີ 30 ຕຸລາ, ງານວາງສະແດງຮ່ວມມືລະຫວ່າງ PTC ASIA 2015 ໃນຊຽງໄຮ ອ່ານເພີ່ມເຕີມ »