-
There are three structures of the pneumatic cylinder: 1.Cylinder: The inner diameter represents the output force of the cylinder. The piston should slide smoothly back and forth in the cylinder, and the surface roughness of the inner surface of the cylinder should reach Ra0.8μm. 2. End cover: The...Прочитај повеќе »
-
After more than 30 years of hard work, China’s hardware industry has become a veritable hardware power. However, China’s hardware companies are still facing the transformation from a hardware power to a hardware power, and need to expand the wings of brand and industrial regionalizati...Прочитај повеќе »
-
The application and development of industrial automation technology is the main means and direction of technological development for industrial technological transformation and technological progress. The technical level of industrial automation not only affects the development of the entire indu...Прочитај повеќе »
-
The chemical name of PU is plastic elastomer, which is divided into two types: polyester type and polyether type (the latter is more expensive and more resistant to hydrolysis). The PU tube we are talking about actually refers to TPU tube, abbreviated as: PU, which is food-grade non-toxic and odo...Прочитај повеќе »
-
1. Cylinder: The inner diameter represents the output force of the cylinder. The piston should slide smoothly back and forth in the cylinder, and the surface roughness of the inner surface of the cylinder should reach Ra0.8μm. 2. End cover: The end cover is equipped with intake and exhaust ports,...Прочитај повеќе »
-
KUCHING, Aug 15 — The Domestic Trade and Consumer Affairs Ministry today warned MyGaz Sdn Bhd, which manages the bottling and distribution of liquefied petroleum gas (LPG) in the state, to take steps to overcome the shortage of gas cylinders. “I urge the company to give its full co-operation so t...Прочитај повеќе »
-
2017,Oct.31st—Nov.3rd, joint exhibition PTC ASIA 2017 in Shanghai Прочитај повеќе »
-
2017, 24-28 АПРИЛ, заедничка изложба Хановер метежот 2017 во Хановер, Германија Прочитај повеќе »
-
2016,17th на 20 Mar., заедничка изложба WIN автоматизација EURASIA 2016 во Истанбул Прочитај повеќе »
-
2016,1st-4 ноември, заедничка изложба PTC Азија 2016 во Шангај Прочитај повеќе »
-
2016,16th, септември, Prius пневматски потег на новата фабрика. Прочитај повеќе »
-
2015,11th на 14-ти, Нов., Се приклучат на изложбата CSF Јоханесбург 2015 во Јоханесбург, Јужна Африка Прочитај повеќе »
-
2015,27th-30-ти октомври, заедничка изложба PTC Азија 2015 година во Шангај Прочитај повеќе »