Series PV300 (Weld end)
2/2-weg-zittingafsluiter hoek formedium tot + 180 ° C, met Weld Verbinding verbreken, DN 15-65
●Hoog debiet
●lange levensduur
●Om hygiënische aansluitingen met laseind organen
●NC en NO universele aandrijvingen met modulaire universele accessoireprogramma tot bedieningseenheden
●Leverbaar met stroomrichting onder of boven seat
●eenvoudige omzetting van de regelfunctie
actuator Size
Poortformaten | Standard Actuator Size mm | PV300 Series Plunger Pilot schuine zitting afsluiter wordt aangedreven door zuigeractuator, hetzij enkelwerkende en dubbelwerkende. Actuatoren bestaan uit drie verschillende materialen, toepasbaar op verschillende werktemperatuur: 2/2 Way roestvrijstalen ventiel met grote stroomcapaciteit V afdichtingen betrouwbare en effectieve afdichting vrij Maintenence, compatibel met verschillende accessoires richtingen aanduidende, slagbegrenzing of handmatige schakeling kan wijze worden bereikt. |
||
VADER | SS | AL | ||
DN15 | 40,50 | 40,50 | 40,50 | |
DN20 | 50,63,80 | 50,63,90 | 50,63,80 | |
DN25 | 50,63,80 | 50,63,90 | 50,63,80 | |
DN32 | 63,80 | 63,90 | 63,80 | |
DN40 | 63,80 | 63,90 | 63,80 | |
DN50 | 63,80 | 63,90 | 63,80 | |
DN65 | 80,100 | 90.125 | 80,100 |
Specificatie
model Specification |
nomal Gesloten | P015NC | P020NC | P025NC | P032NC | P040NC | P050NC | P065NC |
nomal Open | P015NO | P020NO | P025NO | P032NO | P040NO | P050NO | P065NO | |
Materiaal van boday / Actuator | S.S304 316 / PA | |||||||
Bedrijfswerkwijze | Plunger Pilot | |||||||
Ambient en vocht | Lucht, Water, Oil.Steam (50cts Bellow) | |||||||
Poortformaten | G1 / 2 | G3 / 4 | G1 | G1 G1 / 4 | G1 G1 / 2 | G2 | G2 1/2 | |
Nominale Diameter mm | 13 | 18 | 24 | 31 | 35 | 45 | 61 | |
Kv (m3 / h) | 4.2 | 9 | 19 | 33 | 42 | 59 | 90 | |
model Specification |
nomal Gesloten | S015NC | S020NC | S025NC | S032NC | S040NC | S050NC | S065NC |
nomal Open | S015NO | S020NO | S025NO | S032NO | S040NO | S050NO | S065NO | |
Materiaal van boday / Actuator | S.S304 316 / PA | |||||||
zittingafdichting | PTFE / FPM | |||||||
klepsteelkeerring | PTFE / FPM | |||||||
zuigerafdichting | PTFE / FPM / NBR | |||||||
Tempreture van Medium | PTFE | -10 ~ 200 ℃ | ||||||
FPM | -10 ~ 150 ℃ | |||||||
installeren | Downsteam / stroomopwaarts |