-
There are three structures of the pneumatic cylinder: 1.Cylinder: The inner diameter represents the output force of the cylinder. The piston should slide smoothly back and forth in the cylinder, and the surface roughness of the inner surface of the cylinder should reach Ra0.8μm. 2. End cover: The...Läs mer »
-
After more than 30 years of hard work, China’s hardware industry has become a veritable hardware power. However, China’s hardware companies are still facing the transformation from a hardware power to a hardware power, and need to expand the wings of brand and industrial regionalizati...Läs mer »
-
The application and development of industrial automation technology is the main means and direction of technological development for industrial technological transformation and technological progress. The technical level of industrial automation not only affects the development of the entire indu...Läs mer »
-
The chemical name of PU is plastic elastomer, which is divided into two types: polyester type and polyether type (the latter is more expensive and more resistant to hydrolysis). The PU tube we are talking about actually refers to TPU tube, abbreviated as: PU, which is food-grade non-toxic and odo...Läs mer »
-
1. Cylinder: The inner diameter represents the output force of the cylinder. The piston should slide smoothly back and forth in the cylinder, and the surface roughness of the inner surface of the cylinder should reach Ra0.8μm. 2. End cover: The end cover is equipped with intake and exhaust ports,...Läs mer »
-
KUCHING, Aug 15 — The Domestic Trade and Consumer Affairs Ministry today warned MyGaz Sdn Bhd, which manages the bottling and distribution of liquefied petroleum gas (LPG) in the state, to take steps to overcome the shortage of gas cylinders. “I urge the company to give its full co-operation so t...Läs mer »
-
2017,Oct.31st—Nov.3rd, joint exhibition PTC ASIA 2017 in Shanghai Läs mer »
-
2017, 24-28 april, gemensam utställning Hannover Mess 2017 i Hannover, Tyskland Läs mer »
-
2016,17th-20 mars, gemensam utställning WIN EURASIA AUTOMATION 2016 i Istanbul Läs mer »
-
2016,1st-4 november, gemensam utställning PTC ASIA 2016 i Shanghai Läs mer »
-
2016,16th, september, PRIUS pneumatiska flytta till den nya fabriken. Läs mer »
-
2015,11th-14, november, gå utställning CSF Johannesburg 2015 i Johannesburg, Sydafrika Läs mer »
-
2015,27th-30 oktober, gemensam utställning PTC ASIA 2015 i Shanghai Läs mer »