Aluminiomu Alloy Idẹ Pneumatic Solenoid àtọwọdá Plunger ise Guide Head 100 ~ 400 Series
Alaye ọja Apejuwe
ohun elo ti: | Ṣiṣu + Idẹ | Ṣiṣẹ Medium: | Air / atẹgun / toje ategun |
---|---|---|---|
Max Ipa: | 0.4Mpa | Ipa Range: | 0 ~ 0.35Mpa |
LiLohun Range: | -5 ~ 60 ℃ | Port iwọn: | G1 / 4 " |
Apapọ iwuwo: | 0.4kg / PC | foliteji: | DC12V, DC24V |
Kilasi Of Insulation: | F Class | cv: | 0,89 |
Aluminiomu Alloy Idẹ Pneumatic Solenoid àtọwọdá Plunger ise Guide Head 100 ~ 400 Series
Specifiction
awoṣe | MP-08 |
alabọde | air / atẹgun / toje ategun |
Ipa IN-port1.2-OUT1.2 | Min: 0.001Mpa |
Service titẹ ibiti o | 0 ~ 0.35Mpa |
Max ọna titẹ | 0.4Mpa |
Munadoko agbelebu-lesese arer | 16mm2 |
cv iye | 0,89 |
ibaramu otutu | (-5 ~ 60c °) |
Awọn ọna ito otutu | (-5 ~ 50c °) |
Allowable inu lerkage | titẹ = 0.2Mpa ≤0.1 / min |
Allowable ita lerkage | titẹ = 0.2Mpa ≤0.1 / min |
iṣagbesori iduro | Gege si wa oniru |
esi akoko | ON = ≤0.1MS PA = ≥0.1MS |
ariwo ipele | |
Life waye | ≥10 million ni igba |
Allowable foliteji fluctuation | DC12V DC24V |
Ibiti o ti Allowable foliteji | ± 15% |
agbara agbara | 1W |
Kilasi ti Insulation | F kilasi |
aabo struchure | IP65 / IEC / DIN40050 |
fifi ọpa o tẹle | G1 / 4 " |
Asiwaju waya ipari | gbe bi beere |
mefa iṣagbesori | 71.3mm * 42mm * 64.3mm (h) |
awọn ohun elo ti | aluminiomu alloy idẹ |
Apapọ iwuwo | 0.4kg / PC |