Factory making CQ2 compact cylinder for Ecuador Factories
Factory making CQ2 compact cylinder for Ecuador Factories Detail:
Ordering Code
Specification
Bore(mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 8 | 100 |
Working Medium | Air | |||||||||
Motion Pattern | Double Action/Single Action Extrusion type/Single Action Drawing-in Type | |||||||||
Ensured Pressure Resistance | 15.3kgf/c㎡(1.5Mpa) | |||||||||
Max.Pressure | 10.2kgf/c㎡(1.0Mpa) | |||||||||
Environment & Fluid Temp | 5~+60℃ | |||||||||
Thread Type | Inner Thread (Standard)/Outer Thread(Optional) | |||||||||
Buffering | NO | |||||||||
Margin of Stroke Error (mm) | +1.0 0 |
|||||||||
Installation | Through Hole (Standard),Inner size on the two sides(Optional) | |||||||||
Port Size | M5×0.8 | G1/8″ | G1/4″ | G3/8″ |
Overall Dimension
无线图
Dimension Sheet(Double Action)
Model | Stroke Range (mm) | B | D Φ | E | F | H | C | I Φ | J | K | L | M | N Φ | O Φ |
P | Q | W | Z |
CQ2B12-□D | 5~30 | 17+st | 6 | 25 | 5 | M3×0.5 | 6 | 32 | - | 5 | 3.5 | 15.5 | 3.5 | 6.5/depth 3.5 | M5×0.8 | 7.5 | - | - |
CQ2B16-□D | 5~30 | 18.5+st | 8 | 29 | 5.5 | M4×0.7 | 8 | 38 | - | 6 | 3.5 | 20 | 3.5 | 6.5/depth 3.5 | M5×0.8 | 8 | - | 10 |
CQ2B20-□D | 5~50 | 19.5+st | 10 | 36 | 5.5 | M5×0.8 | 7 | 47 | - | 8 | 4.5 | 25.5 | 5.5 | 9/depth 7 | M5×0.8 | 9 | - | 10 |
CQ2B25-□D | 5~50 | 22.5+st | 12 | 40 | 5.5 | M6×1.0 | 12 | 52 | - | 10 | 5 | 28 | 5.5 | 9/depth 7 | M5×0.8 | 11 | - | 10 |
CQ2B32-□D | 5 | 23+st | 16 | 45 | 5.5 | M8×1.25 | 13 | 60 | 4.5 | 14 | 7 | 34 | 5.5 | 9/depth 7 | M5×0.8 | 11.5 | 49.5 | 18 |
10~50 | 7.5 | 1/8 | 10.5 | |||||||||||||||
CQ2B40-□D | 5~50 | 29.5+st | 16 | 52 | 8 | M8×1.25 | 13 | 69 | 5 | 14 | 7 | 40 | 5.5 | 9/depth 7 | 1/8 | 11 | 57 | 18 |
CQ2B50-□D | 10~50 | 30.5+st | 20 | 64 | 10.5 | M10×1.5 | 15 | 86 | 7 | 17 | 8 | 50 | 6.6 | 11/depth 8 | 1/4 | 10.5 | 71 | 22 |
CQ2B63-□D | 10~50 | 36+st | 20 | 77 | 10.5 | M10×1.5 | 15 | 103 | 7 | 17 | 8 | 60 | 9 | 14/depth 10.5 | 1/4 | 15 | 84 | 22 |
CQ2B80-□D | 10~50 | 43.5+st | 25 | 98 | 12.5 | M16×2.0 | 21 | 132 | 6 | 22 | 10 | 77 | 11 | 17.5/depth 13.5 | 3/8 | 16 | 104 | 26 |
CQ2B100-□D | 10~50 | 53+st | 30 | 117 | 13 | M20×2.5 | 27 | 156 | 6.5 | 27 | 12 | 94 | 11 | 17.5/depth 13.5 | 3/8 | 23 | 123.5 | 26 |
Bore | Stroke | B | F | P | Q | Note1. The standard stroke is at a distance of each 5mm. Note2. The stroke between 55mm -100mm(55,60,65,70,80,85,90,95)need to be added thickness of 5,10,15 or 20mm pad. Note3. External dimensions with rumper are same as stsndard type as shown above. |
32 | 75, 100 | 33 | 7.5 | 1/8 | 10.5 | |
40 | 75, 100 | 39.5 | 8 | 1/8 | 11 | |
50 | 75, 100 | 40.5 | 10.5 | 1/4 | 10.5 | |
63 | 75, 100 | 46 | 10.5 | 1/4 | 15 | |
80 | 75, 100 | 53.5 | 12.5 | 3/8 | 16 | |
100 | 75, 100 | 63 | 13 | 3/8 | 23 |
Dimension Sheet(Single Action)
Model | B | D Φ |
E | F | H | C | I Φ |
J | K | L | M | N Φ |
O Φ |
P | Q | W | Z | |||||||
5st | 10st | 20st | 5st | 10st | 5st | 10st | 20st | 5st | 10st | |||||||||||||||
CQ2B12-□S | 22 | 27 | - | 6 | 25 | 5 | 5 | M3×0.5 | 6 | 32 | - | 5 | 3.5 | 15.5 | 3.5 | 6.5/depth 3.5 | M5×0.8 | - | 7.5 | - | - | |||
CQ2B16-□S | 23.5 | 28.5 | - | 8 | 29 | 5.5 | 5.5 | M4×0.7 | 8 | 38 | - | 6 | 3.5 | 20 | 3.5 | 6.5/depth 3.5 | M5×0.8 | - | 8 | - | 10 | |||
CQ2B20-□S | 24.5 | 29.5 | - | 10 | 36 | 5.5 | 5.5 | M5×0.8 | 7 | 47 | - | 8 | 4.5 | 25.5 | 5.5 | 9 /depth 7 | M5×0.8 | - | 9 | - | 10 | |||
CQ2B25-□S | 27.5 | 32.5 | - | 12 | 40 | 5.5 | 5.5 | M6×1.0 | 12 | 52 | - | 10 | 5 | 28 | 5.5 | 9 /depth 7 | M5×0.8 | - | 11 | - | 10 | |||
CQ2B32-□S | 28 | 33 | - | 16 | 45 | 5.5 | 7.5 | M8×1.25 | 13 | 60 | 4.5 | 14 | 7 | 34 | 5.5 | 9/depth 7 | M5×0.8 | 1/8 | - | 11.5 | 49.5 | 18 | ||
CQ2B40-□S | 34.5 | 39.5 | - | 16 | 52 | 8 | 8 | M8×1.25 | 13 | 69 | 5 | 14 | 7 | 40 | 5.5 | 9/depth 7 | 1/8 | - | 11 | 57 | 18 | |||
CQ2B50-□S | - | 40.5 | 50.5 | 20 | 64 | 10.5 | 10.5 | M10×1.5 | 15 | 86 | 7 | 17 | 8 | 50 | 6.6 | 11/depth 8 | - | 1/4 | 10.5 | 71 | 22 |
Thread Outer Type
Bore | C | X | D Φ | H | L | K |
12 | 9 | 10.5 | 6 | M5×0.8 | 14 | 5 |
16 | 10 | 12 | 8 | M6×1.0 | 15.5 | 6 |
20 | 12 | 14 | 10 | M8×1.25 | 18.5 | 8 |
25 | 15 | 17.5 | 12 | M10×1.25 | 22.5 | 10 |
32 | 20.5 | 23.5 | 16 | M14×1.5 | 28.5 | 14 |
40 | 20.5 | 23.5 | 16 | M14×1.5 | 28.5 | 14 |
50 | 26 | 28.5 | 20 | M18×1.5 | 33.5 | 17 |
63 | 26 | 28.5 | 20 | M18×1.5 | 33.5 | 17 |
80 | 32.5 | 35.5 | 25 | M22×1.5 | 43.5 | 22 |
100 | 32.5 | 35.5 | 30 | M26×1.5 | 43.5 | 27 |
Note3)Inner Thread Type
Bore | O | R |
12 | M4×0.7 | 7 |
16 | M4×0.7 | 7 |
20 | M6×1.0 | 10 |
25 | M6×1.0 | 10 |
32 | M6×1.0 | 10 |
40 | M6×1.0 | 10 |
50 | M8×1.25 | 14 |
Product detail pictures:
Related Product Guide:
How Pneumatic Systems and Air Cylinders Work
Tips on Buying an Air Cylinder
Factory making CQ2 compact cylinder for Ecuador Factories, The product will supply to all over the world, such as: , , ,
By from -
By from -