factory Outlets for SeriesPV400 (Flange Ends) to Mozambique Manufacturers
factory Outlets for SeriesPV400 (Flange Ends) to Mozambique Manufacturers Detail:
2/2-way Angle-Seat Valve for medium up to +180°C,Connection, DN 15-100 with Flange Ends
? High flow rate
? Long life cycle
? NC and NO universal actuators with modular
universal accessory program up to control heads
? Deliverable with flow direction below or above seat
? Simple conversion of the control function
Actuator Size
Port Size | Standard Actuator Size mm | Flange specification:DIN2576 (JB/T82.1) ISO/JIS is also available |
||
PA | S.S. | AL | ||
DN15 | 40,50 | 40,50 | 40,50 | |
DN20 | 50,63,80 | 50,63,90 | 50,63,80 | |
DN25 | 50,63,80 | 50,63,90 | 50,63,80 | |
DN32 | 63,80 | 63,90 | 63,80 | |
DN40 | 63,80 | 63,90 | 63,80 | |
DN50 | 63,80 | 63,90 | 63,80 | |
DN65 | 80,100 | 90,125 | 80,100 | |
DN80 | 100 | 125 | 100 | |
DN100 | 125 | 125 | 125 |
Specification
Model Specification |
Nomal Closed | P015NC | P020NC | P025NC | P032NC | P040NC | P050NC | P065NC | P080NC | P100NC |
Nomal Open | P015NO | P020NO | P025NO | P032NO | P040NO | P050NO | P065NO | P080NO | P100NO | |
Nomal Closed | S015NC | S020NC | S025NC | S032NC | S040NC | S050NC | S065NC | S080NC | S100NC | |
Nomal Open | S015NO | S020NO | S025NO | S032NO | S040NO | S050NO | S065NO | S080NO | S100NO | |
Material of boday/Actuator | S.S304 316/PA | |||||||||
Seat seal | PTFE/FPM | |||||||||
Stem seal | PTFE/FPM | |||||||||
Piston seal | PTFE/FPM/NBR | |||||||||
Tempreture of Medium | PTFE | -10~200℃ | ||||||||
FPM | -10~150℃ | |||||||||
Installing | Downsteam/Upsteam | |||||||||
Operating Method | Plunger Pilot | |||||||||
Ambient and fluid | Air,Water,Oil.Steam(50CTS Bellow) | |||||||||
Port size | G1/2 | G3/4 | G1 | G1 G1/4 | G1 G1/2 | G2 | G2 1/2 | G3 | G4 | |
Nominal Diameter mm | 13 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | |
Kv(m3/h) | 4.2 | 8 | 19 | 27.5 | 42 | 55 | 90 | 115 | 200 | |
Pressure Range Mpa | 0~1.6 | 0~1.6 | 0~1.6 | 0~1.6 | 0~1.6 | 0~1.6 | 0~1.6 | 0~1.6 | 0~1.6 | |
Min.Control Pressure Mpa | 0.3 | 0.35 | 0.35 | 0.35 | 0.35 | 0.35 | 0.35 | 0.40 | 0.40 | |
Executor Dimensin mm | 40/50 | 50 | 50/63 | 63 | 63 | 63/90 | 90 | 125 | 125 |
Product detail pictures:
Related Product Guide:
Air Cylinder – Using Pressure to Put Air Into Linear Motion
Importance of Air Cylinders
factory Outlets for SeriesPV400 (Flange Ends) to Mozambique Manufacturers, The product will supply to all over the world, such as: , , ,
By from -
By from -